To display the default Apache page how do I set the primary IP address for my cPanel environment !!!

To display the default Apache page how do I set the primary IP address for my cPanel environment .

Log into your cPanel web server via Secure Shell (SSH).

Located the httpd.conf file using the following command:

located httpd.conf
Open the httpd config file found in step 2 using the following command:

pico /usr/local/apache/conf/httpd.conf
Find the first VirtualHost container in the file. It will look similar to the following: (xx.xx.xx.xx will be the primary IP address of your server)

BytesLog domlogs/cptemp.safesecureweb.com-bytes_log ServerName cptemp.safesecureweb.com DocumentRoot /usr/local/apache/htdocs
Above this section, add the following:

ServerAlias xx.xx.xx.xx ServerAdmin admin@domain.com DocumentRoot /usr/local/cpanel/htdocs ServerName xx.xx.xx.xx
Save and exit the file.

Test the config file to ensure the text you entered is properly formatted using the following command:

/etc/init.d/httpd configtest
Assuming the test returns the message Syntax OK, restart Apache using the following command:

/etc/init.d/httpd restart
The restart of Apache will make your websites unavailable for a few seconds.

To display the default Apache page how do I set the primary IP address for my cPanel environment !!!

To display the default Apache page how do I set the primary IP address for my cPanel environment .

Log into your cPanel web server via Secure Shell (SSH).

Located the httpd.conf file using the following command:

located httpd.conf
Open the httpd config file found in step 2 using the following command:

pico /usr/local/apache/conf/httpd.conf
Find the first VirtualHost container in the file. It will look similar to the following: (xx.xx.xx.xx will be the primary IP address of your server)

<VirtualHost xx.xx.xx.xx> BytesLog domlogs/cptemp.safesecureweb.com-bytes_log ServerName cptemp.safesecureweb.com DocumentRoot /usr/local/apache/htdocs </VirtualHost>
Above this section, add the following:

<VirtualHost xx.xx.xx.xx> ServerAlias xx.xx.xx.xx ServerAdmin admin@domain.com DocumentRoot /usr/local/cpanel/htdocs ServerName xx.xx.xx.xx </VirtualHost>
Save and exit the file.

Test the config file to ensure the text you entered is properly formatted using the following command:

/etc/init.d/httpd configtest
Assuming the test returns the message Syntax OK, restart Apache using the following command:

/etc/init.d/httpd restart
The restart of Apache will make your websites unavailable for a few seconds.

How to configure cPanel !!!

Open a web browser and connect to your cPanel Control Panel located at https://ip address:2087.
Login as the Administrator using the information sent to you in your setup email.
Under the Welcome message click Next.
Read the cPanel license agreement and click I Agree.
Enter the requested information:

Main Shared Virtual Host IP: enter the IP of your VPS Hostname: enter your domain name. If you do not currently have a domain name, you can ignore this field Primary Nameserver: enter the primary name server for your domain name; if you are using HostMySite's nameserver, enter ns1.lnhi.net Secondary Nameserver: enter the secondary name server for your domain name; if you are using HostMySite's nameserver, enter ns2.lnhi.net Tertiary Nameserver: enter the tertiary name server for your domain name; if you are using HostMySite's nameserver, enter ns3.lnhi.net
Click Save.
Click Next Step to begin the Initial Quota Scan.
Click Next Step to continue past the Setup Nameserver screen.
Click Next Step to continue past the Setup Resolver Config screen.
For Step 6, enter a root MySQL password and click Change Password.
Click Finish.

How to configure cPanel !!!

Open a web browser and connect to your cPanel Control Panel located at https://ip address:2087.
Login as the Administrator using the information sent to you in your setup email.
Under the Welcome message click Next.
Read the cPanel license agreement and click I Agree.
Enter the requested information:

Main Shared Virtual Host IP: enter the IP of your VPS Hostname: enter your domain name. If you do not currently have a domain name, you can ignore this field Primary Nameserver: enter the primary name server for your domain name; if you are using HostMySite's nameserver, enter ns1.lnhi.net Secondary Nameserver: enter the secondary name server for your domain name; if you are using HostMySite's nameserver, enter ns2.lnhi.net Tertiary Nameserver: enter the tertiary name server for your domain name; if you are using HostMySite's nameserver, enter ns3.lnhi.net
Click Save.
Click Next Step to begin the Initial Quota Scan.
Click Next Step to continue past the Setup Nameserver screen.
Click Next Step to continue past the Setup Resolver Config screen.
For Step 6, enter a root MySQL password and click Change Password.
Click Finish.

How to install BIND .

[Root @ example ~] # yum -y install BIND BIND-utils
It is set assuming that the global address [192.16.0.80/29], private address [10.0.0.0/24], the following settings in the domain name, and [server.world]: Setting BIND. Please replace to suit your environment. (192.16.0.80/29 is actually the address for private)

[Root @ example ~] # echo 'OPTIONS = "-4"' >> / etc / sysconfig / named # If you do not want to use the IPv6 (you will not be set if used) set [Root @ example ~] # vi / etc / named.conf / / / / Named.conf / / / / Provided by Red Hat bind package to configure the ISC BIND named (8) DNS / / Server as a caching only nameserver (as a localhost DNS resolver only). / / / / See / usr / share / doc / bind * / sample / for example named configuration files. / /

options { # (Listens to port 53 on all interfaces of the server) Comment # listen-on port 53 {127.0.0.1;}; # (If you do not want to use the IPv6) change listen-on-v6 {None;}; directory "/ Var / named"; dump-file "/ Var / named / data / cache_dump.db"; statistics-file "/ Var / named / data / named_stats.txt"; memstatistics-file "/ Var / named / data / named_mem_stats.txt"; # (Where the internal network, etc.) to allow range queries allow-query {Localhost; 10.0.0.0/24; }; # (Range / the place if there is a secondary DNS) range to allow the transfer of information zone allow-transfer {localhost; 10.0.0.0/24;}; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; / * Path to ISC DLV key * / bindkeys-file "/ etc / named.iscdlv.key"; }; logging { channel default_debug { file "data / named.run"; severity dynamic; }; };

# Change the following line from all view "internal" { match-clients { localhost; 10.0.0.0/24; }; zone "." IN { type hint; file "named.ca"; }; zone "server.world" IN { type master; file "server.world.lan"; allow-update {none;}; }; zone "0.0.10.in-addr.arpa" IN { type master; file "0.0.10.db"; allow-update {none;}; }; include "/ etc/named.rfc1912.zones"; }; view "external" { match-clients {any;}; allow-query {any;}; recursion no; zone "server.world" IN { type master; file "server.world.wan"; allow-update {none;}; }; zone "80.0.16.172.in-addr.arpa" IN { type master; file "80.0.16.172.db"; allow-update {none;}; }; };

# Allow-query ⇒ (specify the internal network, etc.) to allow range queries # Allow-transfer ⇒ (range / the place if there is a secondary DNS) range to allow the transfer of information zone # Recursion ⇒ Whether you are allowed to retrieve comeback # View "internal" {~}; ⇒ describes the definition for internal # View "external" {~}; ⇒ describes the definition for the external
# *. *. *. *. Place of in-addr.arpa is about to enter what was to reverse the network address # If the 10.0.0.0/24 # Network Address ⇒ 10.0.0.0 # Range of network ⇒ 10.0.0.0 - 10.0.0.255 # How to specify ⇒ 0.0.10.in-addr.arpa

# If 192.16.0.80/29 # Network Address ⇒ 192.16.0.80 # Range of network ⇒ 192.16.0.80 - 192.16.0.87 # How to specify ⇒ 80.0.16.172.in-addr.arpa

How to install BIND.

[Root @ example ~] # yum -y install BIND BIND-utils
It is set assuming that the global address [192.16.0.80/29], private address [10.0.0.0/24], the following settings in the domain name, and [server.world]: Setting BIND. Please replace to suit your environment. (192.16.0.80/29 is actually the address for private)

[Root @ example ~] # echo 'OPTIONS = "-4"' >> / etc / sysconfig / named # If you do not want to use the IPv6 (you will not be set if used) set [Root @ example ~] # vi / etc / named.conf / / / / Named.conf / / / / Provided by Red Hat bind package to configure the ISC BIND named (8) DNS / / Server as a caching only nameserver (as a localhost DNS resolver only). / / / / See / usr / share / doc / bind * / sample / for example named configuration files. / /

options { # (Listens to port 53 on all interfaces of the server) Comment # listen-on port 53 {127.0.0.1;}; # (If you do not want to use the IPv6) change listen-on-v6 {None;}; directory "/ Var / named"; dump-file "/ Var / named / data / cache_dump.db"; statistics-file "/ Var / named / data / named_stats.txt"; memstatistics-file "/ Var / named / data / named_mem_stats.txt"; # (Where the internal network, etc.) to allow range queries allow-query {Localhost; 10.0.0.0/24; }; # (Range / the place if there is a secondary DNS) range to allow the transfer of information zone allow-transfer {localhost; 10.0.0.0/24;}; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; / * Path to ISC DLV key * / bindkeys-file "/ etc / named.iscdlv.key"; }; logging { channel default_debug { file "data / named.run"; severity dynamic; }; };

# Change the following line from all view "internal" { match-clients { localhost; 10.0.0.0/24; }; zone "." IN { type hint; file "named.ca"; }; zone "server.world" IN { type master; file "server.world.lan"; allow-update {none;}; }; zone "0.0.10.in-addr.arpa" IN { type master; file "0.0.10.db"; allow-update {none;}; }; include "/ etc/named.rfc1912.zones"; }; view "external" { match-clients {any;}; allow-query {any;}; recursion no; zone "server.world" IN { type master; file "server.world.wan"; allow-update {none;}; }; zone "80.0.16.172.in-addr.arpa" IN { type master; file "80.0.16.172.db"; allow-update {none;}; }; };

# Allow-query ⇒ (specify the internal network, etc.) to allow range queries # Allow-transfer ⇒ (range / the place if there is a secondary DNS) range to allow the transfer of information zone # Recursion ⇒ Whether you are allowed to retrieve comeback # View "internal" {~}; ⇒ describes the definition for internal # View "external" {~}; ⇒ describes the definition for the external

# *. *. *. *. Place of in-addr.arpa is about to enter what was to reverse the network address # If the 10.0.0.0/24 # Network Address ⇒ 10.0.0.0 # Range of network ⇒ 10.0.0.0 - 10.0.0.255 # How to specify ⇒ 0.0.10.in-addr.arpa


# If 192.16.0.80/29 # Network Address ⇒ 192.16.0.80 # Range of network ⇒ 192.16.0.80 - 192.16.0.87 # How to specify ⇒ 80.0.16.172.in-addr.arpa